| Model systému | XGDEP-S100/232/100-L-ST |
| Parametry na straně stejnosměrného proudu | |
| Typ a specifikace buňky | LFP 3,2 V / 280 Ah |
| Typ bateriového modulu | 1P52S |
| Battery Cluster Configuration | 260S1P |
| Battery Nominal Energy | 232,96 kWh |
| Voltage Range | 728V~936V |
| AC Parameters (Grid-Connected) | |
| Jmenovitý výstupní výkon | 100 kW |
| Rated Current | 144A |
| Total harmonic distortion rate of current THDI | < 3 %（Měrný výkon） |
| Total harmonic distortion rate of voltage THDU | < 3 %（Měrný výkon） |
| Jmenovité napětí sítě | AC400V,three-phase, four-wire (4-wire) |
| Jmenovitá frekvence sítě | 50Hz/60Hz adaptive |
| Power Factor | 0.99 |
| AC Parameters (Off-Grid) | |
| Jmenovitý výstupní výkon | 100 kW |
| Rated Current | 144A |
| Rated Voltage | 400V,three-phase, four-wire (4-wire) |
| Rated Output Frequency | 50Hz/60Hz |
| Ability to carry unbalanced load | 100% |
| STS Parameter (optional) | |
| Jmenovitý výkon | 150 kW（Critical load power≤100kW） |
| Cutoff Time | ≤20ms |
| PV MPPT Parameter(optional) | |
| Maximum Input Power | 50kW/100kW（selectable） |
| Voltage Range | DC300～680V |
| Number of MPPT | 1 / 2 |
| Maximum Input Current | 160A |
| Systémové parametry | |
| Size (L*W*H) | 1600*1370*2200 (mm) |
| Hmotnost | About 3 tons |
| Protection Level | IP55 |
| operating temperature | -25℃~55℃ |
| Relative Humidity | 0～95％（non-condensable） |
| Highest Altitude | 3000m(>3000m derate) |
| Fire Protection System | PACK + Cabinet Aerosol Fire Fighting + Water Fire Fighting + Blast Relief |
| Compliance with standards | IEC/EN61000，IEC62477，IEC62619，UN38.3，UL9540A，UL1973 |
